Techne Prime Elite Instrukcja Użytkownika Pobierz pdf (Strona 18)

PRIME ELITE SPECIFICATION

TEMPERATURE

Block temperature range 4°C or 20ºC below ambient to 100ºC

Block uniformity <±0.3ºC

Temperature accuracy <±0.2ºC

Gradient availability 10°C to 100°C

Maximum gradient 30ºC (16ºC with the 384-well block)

Minimum gradient 1ºC

Column uniformity with a 10ºC gradient <±0.3ºC

Pre-run sample cooling Yes, 4ºC

Temperature set point adjustment 0.1ºC

HEATING/COOLING RATE

Maximum heating rate 5.0ºC/s

Minimum heating rate 0.1ºC/s

Maximum cooling rate 3.0ºC/s

Minimum cooling rate 0.1ºC/s

HEATED LID

Selectable heated lid temperature 35 to 115ºC or off

Pre-heat lid Yes

Warm up time from ambient <2 min

Over-temperature cut-out Yes

Regulated heated lid pressure Automatic

The heated lid is only operational if the block temperature is set above 35ºC

PROGRAMMING*

Program interface 5.7” colour VGA LCD touch screen

Maximum number of programs stored 1000

Maximum number of stages per program 99

Maximum number of steps per stage 99

Maximum number of cycles per stage 99

Programmable ramp rate Yes, 0.1ºC/s steps

Maximum hold time 99h 59m 59s

Minimum hold time 1s

Gradient calculator Yes

Incremented/decremented temperature Yes

Incremented/decremented time Yes

Pause facility Yes

Program naming Alpha numeric plus symbols

Password protection Yes

Keyword selection Yes

Run completion time Yes

End of program alarm Yes

Auto resume on power failure Yes with options of 10min, 30min, 1h or always

Oligonucleotide T

calculator Yes, based on the Nearest-Neighbour method

*Programming for Satellite units is via a Prime Elite unit or Techne Workbench PC software.

Breslauer, K.J.; Frank, R.; Blocker, H. and Marky, L.A. (1986) Proc. Natl. Acad. Sci. USA 83, pp

3746-3750.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 68 69

Komentarze do niniejszej Instrukcji

Brak uwag

Techne Prime Elite Instrukcja Użytkownika Strona 18

Komentarze do niniejszej Instrukcji